With high rigidity rack design,they are welded with the use of high-quality steel plates,through relieving of internal stresses,so that stability and reliability of the whole machine in precision are enhanced.
Performance Feature
1.Hight steel performance frame,large center span of the conneeting rod,strong anti partial load,optimize design.
2.In order to guarantee relative stationarity of machine operation,it is necessary to balance two balancers.
3. Moulding-adjustment precision is as high as 0.1mm, safe, speedy,and reliable.
4. Through hard oxidation and grinding, such parts as bent axles, gear sets,and connecting rods possess higher combination property and tolerance.
5.Adopt highly sensitive and reliable clutch/brake and internationally top duplex magnetic valve, as well as overload protection devices, to guarantee precision and safety
for operation and stop of press rams.
6.Machine's structural design shall be reasonable, for the convenience of realizing automatic production, reducing cost, and improving efficiency.
7.Possess advanced design concepts, low noise, low consumption, and energy saving.
Technical Specification
| Name |
Unit |
APC-110 |
APC-160 |
APC-200 |
APC-250 |
APC-315 |
| Model |
|
V |
H |
V |
H |
V |
H |
V |
H |
V |
H |
| Capacity |
ton |
110 |
160 |
200 |
250 |
315 |
| Rated tonnage point |
mm |
5 |
3 |
6 |
3 |
6 |
3 |
7 |
3.5 |
7 |
3.5 |
| Stroke |
mm |
180 |
110 |
200 |
130 |
250 |
150 |
280 |
170 |
280 |
170 |
| Stable speed |
s.p.m |
35-65 |
50-100 |
30-55 |
40-85 |
25-45 |
35-70 |
20-35 |
30-60 |
20-35 |
30-60 |
| Max.die height |
mm |
400 |
435 |
450 |
485 |
500 |
550 |
550 |
605 |
550 |
605 |
| Slide adjustment |
mm |
100 |
100 |
120 |
120 |
120 |
| Bolster area |
mm |
1800×650×130 |
2000×760×150 |
2400×840×170 |
2700×900×170 |
2700×900×170 |
| Slide area |
mm |
1400×500×70 |
1600×550×70 |
1850×650×95 |
2100×700×95 |
2100×700×95 |
| Main motor |
kwxP |
11×4 |
15×4 |
18.5×4 |
22×4 |
30×4 |
| Air pressure |
Mpa |
0.6 |
0.6 |
0.6 |
0.6 |
0.6 |
| Presses precision |
|
JIS(CNS) 1class |
| Die cushion model |
|
Two plate & two cylinders |
| Die cushion capacity |
ton |
3.6×2 |
6.3×2 |
10×2 |
14×2 |
14×2 |
| Air pressure |
Mpa |
0.6 |
0.6 |
0.6 |
0.6 |
0.6 |
| Stroke |
mm |
80 |
80 |
80 |
100 |
100 |
| Die cushion work part dimension |
mm² |
350×235×2 |
410×260×2 |
540×350×2 |
640×470×2 |
640×470×2 |
Standard configuration
> Dry clutch brake
> Standard operating system of yiduan
>Choice/cutting/inch/safe journey/continuation of operating mode
> Oil pressure overload protection device
> Over-run safety device
> Duplex magnetic valve
> Misfeed detection consent
> Electric slider adjusting device
> Digital moulding-height indicator (unit:0.1mm)
> Electric butter lubricating device
> Accumulative counter (6 digits)
> Pre-determined counter (6 digits)
> Maintenance counter (6 digits)
> Life counter (6 digits)
> Electronic rotatry cam switch (6 connections)
> Air-blast device 1/2" one circuit
> Air source connector 1/2" two circuit
> Error inspection socket
> Power socket
Optional Configuration
> Wet clutch brake
> Die cushion device
> Vs variable-speed motor
> Touch-screen device
> Photo-electric safety device
> Upper slider feeding device
> Main motor inversion device
> Foot switch
> Safety dog and safety latch
> T-type two-hand button operating floon
> Inspection variable-connection magnetic valve
> Anti-vibration mechanical foot
> Rapid tooling exchange
> Upper die clamper
> Lower die clamper
> Die lifter
> Mould-shift arm
> Basic bolt and soleplate
> Automatic feeder device
> Three-in-one NC straightening feeder
> NC Roll feeder
> Three-in-one feeder and straightening machine
> Leveller
Transport And Pack
We are currently reviewing our product packaging from the angles of waste-reduction and resource-saving. We are also working on improving transportation efficiency from the design phase of product development.
All the spare parts of the machine were covered by the some soft materials mainly using plastic film.
Our wooden pallet is after fumigation treatment. Needn't timber inspection, saving shipping time.
Our metal pallet is special designed and paint grease at the bottom so that we can load easily.
Enterprise Profile
Our Customers
Why Choose Us?
Yiduan are specialist in manufacturing precision and high-speed punching press machines (15-2500T). Our company has many super large CNC machines and various precision testing machines. By advanced quality control method of a whole series imported physical & chemical equipment and enterprise information engineering such as ERP, PDM, CAM, etc. To realize a quick response to the market's demands.
Yiduan insists to the quality policy of "pursue excellent quality with a dedicate service" and continuously improves the whole company's quality awareness and the overall quality level. We define a clear quality objectives and principles to guarantee the products advancement, reliability and advantages in market competition. We are looking forward to your prompt orders and welcome to contact us for any special requirement.
Our customers are all over the world,our continuously persistent development history is our incomparable wealth!
Audited Supplier 
){kind=link}
){kind=link}